RART = Non Tracking Tube/ Anti-Tracking Tube

Aicom Insutech India Heat Shrinkable Anti Tracking tubes (RART) are used to reconstruct the electrical cable by providing insulation and tracking resistance as well as environmental protection against chemical pollution and UV rays for cable cores of plastic and paper insulated cables and terminations rated up to 36kV.

RCBT = Semi-Conductive Black Tubes

Aicom Insutech India Heat Shrinkable Semi-Conductive Tubes (RCBT) are used to reconstruct the electrical cable by providing insulation in medium voltage as integral part of cable joint along with insulating tubes in complementary combination rated up to 36kV and to rebuild the semi- conductive layer on power cables.

RDWT = Dual Wall Tubes for Joints (Black/Red)

Aicom Insutech India Heat Shrinkable Dual Wall Tubes (RDWT) are used to reconstruct the electrical cable by providing insulation in form of a dual layer co-extruded tube with a red inner insulating layer and an outer black semi-conductive layer which is used in medium voltage plastic and paper insulated cable joints rated up to 36kV. The single tube provides both an insulating thickness and an insulation screen on the built-up insulation in the joint.

RIHTU / RIHTA = Heavy Wall Heat Shrinkable Tubing (Uncoated / Adhesive Lined)

Aicom Insutech India Heat Shrinkable Heavy Wall Heat Shrink Tubes (RIHT U/A) are used for environmental sealing of plastic and paper insulated cable joints rated up to 36kV. The tubes can be supplied with an internally coated adhesive layer or in an uncoated form depending on the application. These tubes are made from thermally stabilized, cross linked, UV and weather resistant polymeric material and have a nominal shrink ratio of 3:1 and an unlimited

RIMTU / RIMTA = Medium Wall Heat Shrinkable Tubing (Uncoated / Adhesive Lined)

Aicom Insutech India Heat Shrinkable Medium Wall Tubes (RIMT) provide environmental protection to the cable cores of plastic and paper insulated cable terminations. As well as insulation over the connector area in cable joints (rated up to 1kV). The insulating tubes are made from thermally stabilized, cross linked, weather resistant polymeric material. The tubes can also be supplied internally coated with hot melt adhesive (RIMTA).

RITT = Clear Insulating Tubes

RITT is designed for all general applications such as insulation, strain relief of electrical installation. This transparent thin wall tubing is particularly suitable where high tensile strength and good resistance to solvents and chemicals is important, used as Oil Barrier tube in PILC cables.

RITTA 3:1 = Thin Wall Heat Shrinkable Tubing (Adhesive Lined, 3:1 Shrink Ratio)

RITTA 3:1 is a flexible Heat Shrinkable tubing with internal coating of a hot melt adhesive, to provide moisture proof sealing on cable jackets and other components.

    Features:
  • Adhesive Lined
  • 3:1 shrink ratio
  • Flame Retardant (Outer Jacket)
  • Excellent resistance to chemicals and solvents
  • Excellent electrical properties
  • Continuous operating temperature: -50°c to 110 °c
  • Hot melt adhesive
  • RoHS Compliant

RITTA 4:1 = Thin Wall Heat Shrinkable Tubing (Adhesive Lined, 4:1 Shrink Ratio)

RITTA 4:1 is a flexible Heat Shrinkable tubing with internal coating of a hot melt adhesive, to provide moisture proof sealing on cable jackets and other components. The 4:1 shrink ratio means it is ideal for irregular shapes with widely varying dimensions.

    Features:
  • Adhesive Lined
  • 4:1 shrink ratio
  • Flame Retardant (Outer Jacket)
  • Excellent resistance to chemicals and solvents
  • Excellent electrical properties
  • Continuous Operating Temperature: -50°c to 110 °c
  • Hot melt adhesive
  • RoHS Compliant

RITTU 2:1 = Thin Wall Heat Shrinkable Tubing (2:1 Shrink Ratio)

RITTU is designed for all general purpose applications where thick or medium wall tubing is not required. Typical applications include cable marking, colour coding, insulation and light weight harness jacketing.

    Features:
  • 2:1 shrink ratio
  • Flame Retardant
  • Excellent resistance to chemicals and solvents
  • Excellent electrical properties
  • Continuous operating temperature: -50°C to 125°C
  • Available in long length reels

RITTU 3:1 = Thin Wall Heat Shrinkable Tubing (3:1 Shrink Ratio)

RITTU is designed for all general purpose applications where thick or medium wall tubing is not required. Typical applications include cable marking, colour coding, insulation and light weight harness jacketing.

    Features:
  • 3:1 shrink ratio
  • Flame Retardant
  • Excellent resistance to chemicals and solvents
  • Excellent electrical properties
  • Continuous operating temperature: -50°C to 125°C
  • Available in long length reels